Electrical characteristics

1.   15-inch LCD computer display

2.   Anti-oil and anti-pollution keyboard

    Anti-corrosion, anti-oil and anti-pollution keyboard, longer service life    and more durable.

3.   Industrial-grade low-power motherboard

4.   New design of integrated group-based controller:

The most stable and advanced numerical control system is developed by our Company with 30 years of experience and improvement. It adopts the industrial low-power motherboard and PC104 connection interface, and VLSI ultra-large integrated circuit design, with powerful functions, stable performance and durability.

5.   The PC104 interface replaces the old ISA slot to solve the problems such as poor contact of the ISA; DRAM solder plate design and Taiwan's original imported industrial CF card storage device support U disk operation  (optional), long and durable life.

6.   Software operation function:

The all-Chinese operating system is simple and clear, easy to learn and use, and also has the operation prompt function. The design is the most considerate, and supports English and Spanish. 49 sets of working coordinates, supporting the edge finding ball function, automatic edge finding function, various processing parameters, power-off coordinate recording, the most complete functions, suitable for all kinds of simple/complex/multimode multi-cavity/deep hole... all kinds of mold processing.

7.   Built-in graphite processing circuit: (LD35/CR5C):

The new graphite processing circuit can process large area, sharp shape, deep hole and thin sheet with a maximum processing efficiency of more than 2 times compared with the old model.

8.   Wide range of electrode and mold processing capabilities:

Deep hole, mirror surface, connector, superhard alloy, powder metallurgy, graphite electrode, various kinds of electrode, mold processing ability.

9.   Superhard alloy processing circuit: (optional)

Copper ->tungsten steel: The patented LC discharge machining circuit invented by Creator can effectively control the electrode consumption and processing efficiency. The electrode consumption can be controlled below 6%, with faster and finer speed. The surface crack of tungsten steel is smaller, and polishing is easier.

Mechanical characteristics:

1.   New integrated design:

The integrated design of the machine covers only 2/3 of the area of the old model; The manual control box is installed on the control panel, so it is easier to operate and adjust without another hand; The oil sink adopts single-door design, which is simple to use and does not occupy space.

2.   New fire-retardant dust-proof cloth:

       The main shaft dust-proof organ cover is made of flame-retardant material,    which can effectively reduce the probability of fire prevention.

3.   LED lamp

4.   High rigid casting:

It is made of FC-35 casting, and after aging treatment, the surface hardness of the worktable reaches above HRC45 degrees.

5.   Design of high rigidity transmission structure:

The three-axis precision ball screw, linear track and imported bearing imported from Taiwan are used to effectively reduce the overall back clearance, ensure the servo transmission accuracy, prolong the service life of the screw and bearing, and improve the processing performance and precision,

6.   High-speed spindle jump system: (optional)

Using Japanese AC servo motor, the speed of spindle can reach more than    2500mm/min, and the processing efficiency of thin sheet and deep hole can be    increased by more than 50%.

7.   Energy-saving centrifugal pump:

Energy-saving oil pump is adopted, saving more than 30% electricity.

8.   Three-axis 1 µ grating ruler and three-axis fully closed circuit design are adopted to effectively improve the processing accuracy

Mechanical specifications：

Diagram floor area：

Electrical specifications: